hawa 2676-0201-00-00 Manuel D'utilisation page 7

Contents
1 Introduction
2 Safety regulations
2.1 General safety regulations
2.2 Additional safety regulations
3 Characteristics
3.1 Intended use
3.2 Predictable misuse or improper handling
3.3 Residual risks
4 Transport and storage
4.1 Receipt and control of deliveries
5 Unpacking and control of goods
6 Commissioning
6.1 Assembly
6.2 Hydraulic connection
7 Code of practice
7.1 Insertion of shear plates
7.2 Working with the length stop for cutting
7.3 Cutting cable ducts to length
8 Technical data and limits of use
9 Maintenance / cleaning
10 Waste disposal
11 Warranty
12 Troubleshooting and service
Pay particular attention to underlined, bold text or positions marked with warning signs
in this manual!
1 Introduction
Thanks for purchasing the hydraulically operated cable duct cutter type 2676.
The operation manual will provide a detailed description on how to operate this device safely.
The instructions are constantly reviewed and updated if necessary (subject to technical changes) - see
https://www.haewa.com/dialogue-contact/download-centre.html
Please treat this document with care and make sure that it is read, understood and followed by all operating personnel.
This operation manual must be readily available during the entire service lifetime of the device.
If you still have questions about the machine or its function after reading this manual, please contact your local sales office or häwa directly.
2 Safety regulations
2.1 General safety regulations
Machinery / tools with moving parts always bear the risk of bodily injury and require specific caution and carefulness.
Please read this manual carefully before operating this equipment to minimize risks.
• This device may only be operated in faultless condition.
• Modifications must be reported immediately to the supervisor.
• Keep the work environment tidy.
• Make sure that the working area is well-lit.
• Secure long work pieces against falling during operation.
• Clean up immediately possible oil leakages.
• Operating personnel is obliged to wear suitable protective clothing (e.g.: gloves, anti-slip work shoes, close-fitting clothes, ear protectors, safety
glasses).
• Work at the machine is prohibited if concentration could be affected. (e.g.: through the consumption of drugs and alcohol).
• No other persons apart from the operator may stay in the direct working area during operation.
The equipment is not designed and intended for any other work than described in this manual (see item 3).
In the case of misuse, we will not assume any liability for resulting damages.
7