Hama PR-2180 Mode D'emploi page 7

Note – Automatic standby
• Please note that the speaker system switches to
standby mode after 15 minutes of no activity (no
audio playback / no other activity).
• Press any button on the remote control or the
subwoofer to re-activate the speaker system.
• The system is shipped from the factory with an
auto standby function. To deactivate this mode,
press button 5 on the front of the subwoofer
system or on the remote control for about 3
seconds. 'E off' or 'E on' appears in the display.
6. Audio source selection
6.1 AUX playback
• Press the INPUT button on the remote control or
the MODE button on the subwoofer several times to
select the AUX connection as the audio source. The
AUX selection is shown on the subwoofer's display
and signalled by an "AUX" speech message.
6.2 Playback using Bluetooth
• Press the INPUT button on the remote control or
the MODE button on the subwoofer several times
to select Bluetooth
as the audio source. The BLUE
®
selection is shown on the subwoofer's display and
signalled by a "Bluetooth" speech message.
6.3 DVD playback
• Press the MODE button on the remote control
or press the MODE button on the subwoofer
several times to select the DVD connection as the
audio source. The DVD selection is shown on the
subwoofer's display and signalled by an "DVD"
speech message.
6.4 USB/SD playback
• Insert a USB memory stick or SD/SDHC card into the
device.
• Press the MODE button on the remote control or
press the MODE button on the subwoofer several
times to select USB/SD as the audio source. The USB/
SD selection is shown on the subwoofer's display and
signalled by an "USB" speech message.
®
6.5 FM radio playback
• Press the MODE button on the remote control or
press the MODE button on the subwoofer several
times to select the built-in FM radio as the audio
source. The FM selection is shown on the subwoofer's
display and signalled by an "FM" speech message.
7. Advanced features
7.1 General and individual volume control
• Press VOL+ or VOL- to increase or decrease the
volume of the system.
7.2 Bluetooth
first connection (pairing)
®
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth
range of max. 10 metres.
®
• Open the Bluetooth
®
and wait until "PR-2180" appears in the list of
Bluetooth devices found.
®
• Select "PR-2180" and wait until the speaker is listed
as connected in the Bluetooth
terminal device.
• If the Bluetooth
has connected successfully BLUE will
®
be shown on the display.
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• If not, you can only use the speaker for playback
using the included audio cable.
• Note that the maximum range for Bluetooth
10 metres without obstacles such as walls, people,
etc.
7.3 Manual FM radio station search
• You can search for stations manually by briefly
pressing the
|
front display.
• If you press and hold the
on the subwoofer's front display (about 2 seconds),
the device will automatically search for the next
receivable station within the regional FM transmission
area.
-capable terminal
®
is activated.
®
settings on your terminal device
settings on your
®
capable.
®
buttons on the subwoofer's
|
/ buttons
| | ||
is
®
5