Intended Use; Connecting And Use; Toslink/Coax Audio Converter; Convert Coaxial (Spdif) To Toslink - ClickTronic 60834 Mode D'emploi

uSer'S MAnuAl
• Power Supply unit
• user's manual
3

Intended use

it is not allowed to use the device in other
ways than described in chapter "Description
and Function". use this device only in dry
interior rooms. the symbol with the house
reminds you of that. if you do not attend to
these regulations and notes on safety, it
might causes fatal accidents, injuries and
damages to persons and property.
4

Connecting and use

risk of life by electric shock
>> Do not touch voltage carrying parts.
1. Check the packing content for being
complete and undamaged.
2. Compare the specifications of all used
devices and check them for being com-
patible to each other.
3. Switch off all devices, to be connected.
4.1 TOSLINK/Coax Audio
converter
4.1.1 Convert Coaxial (SpdIF) to
Toslink
COAX
18
TOS
CliCktroniC
®
1. Connect a Coaxial cable to the input of
the tOSlinK/Coax Audio Converter
and to your source device.
2. Connect a toslink cable to the output of
the tOSlinK/Coax Audio Converter
and to your output device.
3. Connect the included power supply unit
to the tOSlinK/Coax Audio Converter
and then to a mains socket.
The TOSLINK/Coax Audio Converter is rea-
dy to use, when the Operation LED shines.
4. Set the switch to „Coaxial".
5. Switch on all connected devices.
4.1.2

Convert Toslink to Coaxial

(SpdIF)
TOS
1. Connect a Coaxial cable to the output
of the tOSlinK/Coax Audio Converter
and to your output device.
2. Connect a toslink cable to the intput of
the tOSlinK/Coax Audio Converter
and to your source device.
3. Connect the included power supply unit
to the tOSlinK/Coax Audio Converter
and then to a mains socket.
The TOSLINK/Coax Audio Converter is rea-
dy to use, when the Operation LED shines.
4. Set the switch to „Opticial".
5. Switch on all connected devices.
CliCktroniC
®
uSer'S MAnuAl
COAX
19