Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
c. Auxiliary handle (Fig.3)
Fig. 3
d. Accensione e spegnimento (Fig.4)
Fig. 4
3. Operation for working
a. Grinding
!
Never use a cutting disc for grinding.
WARNING
To grind, only use the guard designed for grinding
CAUTION: Never press the spindle locking button while the disc is rotating.
For best grinding results, position the tool at an angle of between 30° and 40° Move
the tool backwards and forwards applying light pressure. This way, the item being
worked on will not heat up too much, will not discolor and avoids forming grooves.
•
The auxiliary handle can be
assembled in three different positions
around the casing to meet the
operator's different needs.
•
To assemble the handle, simply screw
it into one of the attachment points.
Check that the handle has been
securely fastened, but don't screw it
in too tightly.
•
Per accenderlo, premere la parte
centrale del interruttore verso il
basso, quindi spingere in avanti e
premere la parte anteriore dello
Switch verso il basso.
•
Una volta che il macinino si avvia,
rilasciare l'interruttore e il motore
continua a funzionare fino a quando il
grilletto viene rilasciato.
•
Per disattivarlo, premere
nuovamente l'interruttore medio
basso.
Publicité
Table des Matières
