Instruction manual
PartS deScriPtion
1. Base
2. Tower
3. Spiral
Before firSt uSe
•
Take the appliance and accessories out of the box. Remove the stickers,
protective foil or plastic from the device.
•
Before use, clean the base and all other parts with a damp cloth.
uSe
•
Connect the power cable to the socket. (Note: Make sure the indicated
voltage on the device matches the local voltage before connecting the
device. Voltage 220V-240V 50Hz)
•
It is essential that the chocolate fountain is placed on a flat surface so
the cascading chocolate effect will work properly.
•
We recommend using cooking chocolate for your first attempt, so the
device will function optimally.
•
Turn the switch to the HEAT position. It will take between 3-5 minutes
to warm up. Whilst the unit is heating, prepare the chocolate. For the full
cascading chocolate fountain effect, you will need at least 300-400 grams
4
3
of chocolate and 80 ml of vegetable oil to thin the chocolate down slightly.
•
The quickest way to prepare the chocolate is in a microwave. Use a
suitable jug or container and add 300-400 grams of chocolate chips
(or broken bars). Pour in up to 80 ml of vegetable oil and cook on full
power for 2 minutes. Take it out of the microwave and stir the mixture,
ensuring that all the chocolate has melted. Pour it slowly into the
2
preheated bowl of the fountain.
•
As a rough guide, dip a desert spoon into the mixture and allow it to
run off the spoon. If the mixture is slightly translucent this is a good
1
indicator that the consistency is correct.
•
The spiral drive draws the warm chocolate up to the top of the tier system
and then the enticing cascade starts to flow over the tiers. The chocolate
will pour back into the bowl and then starts its journey all over again.
•
Once the chocolate is in full flow, everyone can start to dip the food of
their choice like exotic fruits, profiteroles, marshmallows and biscuits.
The fountain is also suitable for sauces other than chocolate. For
something completely different try a warm fruit sauce or a cheese,
barbecue or sweet chili sauce.
cleaning
•
Before cleaning the device, first pull out the cord and allow the
appliance to cool down completely. Then disassemble all parts and
clean them before the chocolate will solidifies, then dissemble all parts
and clean one by one before the chocolate sets.
•
Carefully pour out the remaining chocolate mixture from the base.
Do not pour the chocolate into the sink or drain. Instead drain it into
a container or bag to keep for later use or pour it into little moulds for
making chocolate animals etc.
•
Clean the outside of the appliance with a soft and slightly moistened cloth.