dirna Bergstrom Bycool compact 1.4 Instructions De Montage page 22

COMPACT 1.4
EN
9 Via the interior section, laterally align the
equipment in the hatch.
! Important: If the seal (A) is not attached
to the base, remove the protective paper
and attach as indicated.
A
10 Attach the channelling equipment on the front.
! Important: Any chanelling equipment (B)
included should be discarded as it is not
valid for this unit.
B
11 Connect the (2) 4 ways boxes, the (2) 2 ways
boxes and connect also the feeding wiring in the
2 ways boxes in T."
Where the electronic has white cables the
wire clamp from those ones will remain
free.
9
10
Area to apply
adhesive
11
22
Air conditioning for vehicles
A
=
=