Albatross A1 Instructions D'utilisation page 15

Operation
A. On/Off button incl. LED display
- No light = no electricity
- Blue light = ready for use
B. Speed controller (potentiometer)
- The desired speed can be set by turning the controller.
We recommend to operate the Albatross with Stop and Go.
To do this, switch on the trolley and select your ideal speed with the speed control (B). To
stop the albatross, press the on / off button (A). The Caddy comes to a standstill with a delay.
In order to continuing driving at your preset ideal speed, all you have to do now is press the
on / off button (A).
If you operate the trolley with Stop and Go, you can also use the distance function.
C. Distance function
- Press and hold the On/Off button
5 sec = 10 sec running time
10 sec = 20 sec running time
If the LED display flashes, the distance function is active.
A + C
B
15