Troubleshooting; Technical Data; Disposal - Conrad JC-232 Mode D'emploi

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the
problem yourself. If the problem cannot be solved with the steps that are listed, contact
the customer service department.
Do not attempt to repair a defective electrical device yourself!
The device does not work. No steam is emerging.
• Is the mains plug inserted in the socket correctly?
• Is the socket defective? Try another socket.
• Check the fuse of the mains connection.
• Is the device switched on? Move the On / Off switch (7) to the I position.
• The device is not yet ready to operate. The device needs to heat up for around
20 – 30 seconds before the steam can emerge.
• The water reservoir (9) is empty. Top up the water reservoir again (see "Filling the
Water Reservoir").
• Is the device scale-encrusted? Descale the water reservoir in the manner described
in "Cleaning and Care", in the "Care" section.

Technical Data

Model number:
Article number:
Power supply:
Protection class / rating:

Disposal

Dispose of the packaging material in an environmentally friendly manner and take
it to a recycling centre.
Dispose of the device in an environmentally friendly manner at a recycling centre
for used electrical and electronic devices. More information is available from your
local authorities.
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650
(Calls to German landlines are subject to charges. The cost varies depending on the service
provider.)
01784_DE-EN-FR-NL_A5_V2.indb 19 01784_DE-EN-FR-NL_A5_V2.indb 19
19
JC-232
01784
220 – 240 V ~ 50 Hz, 1000 W
I, IPX4
EN
All rights reserved.
02.02.2018 11:44:52 02.02.2018 11:44:52