Items Supplied And Device Overview; Before Initial Use; Assembling The Device - Conrad JC-232 Mode D'emploi

EN

Items Supplied and Device Overview

13
12

Before Initial Use

1. Check the items supplied for completeness and any transport damage. If you fi nd any
damage to the components, do not (!) use them, but contact our customer service
department.
2. Remove any fi lms or stickers that may be present from the device and accessories.
Note: Water residues in the reservoir can be attributed to quality checks per-
formed prior to delivery.

Assembling the Device

1. Prior to assembly, spread out a protective fi lm if necessary to prevent any damage
to delicate surfaces.
2. Plug together the three parts of the handle rod (1+3+4). When you do this, make sure
that the cable winders (2+5) are parallel to one another. To take the handle rod apart,
simply pull it apart.
3. Insert the end of the handle rod into the upper opening of the main unit (6). To take
the handle rod off, simply pull it off.
4. Insert the cleaning foot (9) into the main unit until you hear the cleaning foot engage.
To detach the cleaning foot (10), press the release button (13) on the back of the main
unit and pull it off at the same time.
01784_DE-EN-FR-NL_A5_V2.indb 16 01784_DE-EN-FR-NL_A5_V2.indb 16
16
1
1 Upper handle rod with handle
2 Upper cable winder
3 Middle handle rod
4 Lower handle rod
2
5 Lower cable winder
6 Main unit
7 On / Off switch (I / 0)
3
8 Water reservoir cap
9 Water reservoir
10 Cleaning foot
4
11 Carpet glider
5 12 Floor cloth
13 Release button for cleaning foot
6
7
Not shown:
8 • Measuring cup
• Instruction manual
9
10
11
02.02.2018 11:44:51 02.02.2018 11:44:51