Description Of Symbols; Environmental Protection - Silverline 802165 Mode D'emploi

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments
For indoors use only!
T-130˚
Internal temperature fuse triggering at 130°C
T-130˚
Class I construction (protective earth)

Environmental Protection

Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice
Conforms to relevant legislation and safety standards
Caution
WARNING: Moving parts can cause crush and cut injuries.
Risk of electrocution!
V
Volts
~
Alternating current
A
Ampere
n
No load speed
o
Hz
Hertz
W, kW
Watt, kilowatt
(revolutions or reciprocation)
/min or min
-1
per minute
6
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and
limit the time of exposure if necessary. If sound levels are uncomfortable, even with ear
protection, stop using the tool immediately and check the ear protection is correctly fitted
.
and provides the correct level of sound attenuation for the level of sound produced by
your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may
produce increased levels of noise and vibration. www.osha.europa.eu provides information
on sound and vibration levels in the workplace that may be useful to domestic users who
use tools for long periods of time.
WARNING! When using electric power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury including the following
safety information. Read all these instructions before attempting to operate this product
and save these instructions for future use.
WARNING! This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children must be supervised to ensure that they do not play
with the appliance.
CAUTION
instructions, taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a hazardous
situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Original Instructions
Specification
Voltage: ................................................ 230V~ 50Hz
Power: .................................................. 450W
No Load Speed: .................................... 2950min
Ceramic saw blade: .............................. Ø180 x 2.2 x 5 x
Compatible materials:...........................Ceramic tiles
Max. Depth of Cut: ................................ 34mm
Types of cut: ......................................... Straight, Mitre,
Power cord length: ............................... 2kg
Ingress protection: ................................ IP54
Protection Class: ..................................
Weight: ................................................. 7.5kg
Sound and vibration information:
Sound Pressure LPA: ............................ 92dB(A)
Sound Power LWA: ............................... 105dB(A)
Uncertainty K: ....................................... 3dB(A)
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
:
Use the power tool, accessories and tool bits etc. in accordance with these
-1
Ø 22.2mm
Bevel, Compound