Publicité
Les langues disponibles
Les langues disponibles
- When installing the appliance,
ensure at least the minimum dis-
tances from the floor, walls, furni-
ture, etc. (Fig. A).
- The power supply must be pro-
tected by a residual current de-
vice with a rated current not ex-
ceeding 30 mA, particularly in the
case of installation in a room con-
taining a bath or shower.
- If the power cable is damaged,
it must be replaced by the manu-
facturer, its after-sales service department or a similarly quali-
fied party in order to avoid any hazard.
- Avoid installing the unit in a draught that could cause it to be
adjusted incorrectly.
- This direct electric heater is designed to provide room heat-
ing in new or existing individual or communal housing or similar
premises.
Installing the appliance
The appliance must be installed in compliance
with the standards in force in the country of in-
stallation (NFC 15-100 for France), particularly
for installation in a bathroom.
(*) These instructions were drawn up at the time of manufacture of the appliance
and in accordance with the standards in force at that time.
The manufacturer reserves the right to modify the installation and operating instruc-
tions at any time in order to take into account the applicable standards and any
amendments to them.
Any obstacle
E.g. curtains
Floor
of the appliance
Fig. A
Fig. A
Furniture
Furniture
in front
57.
Publicité
