Proper Use; Introduction - Telic STD32 Mode D'emploi

In case of condensation allow a period of about 2 hours
for acclimatisation.
Keep away the device from flower vases, bath tubs,
washbasins, liquids etc.
The device is meant for operation in dry and clean rooms.
Protect the device from humidity, spray water and heat.
Do not expose the device to heavy vibrations.
Do not operate the device in areas where are or could be
inflammable gas, vapours or dust.
The unit may only be repaired by a specialist.
Only original parts have to be used when repairing the
unit. The use of differing spare parts can cause serious
material loss or personal injury.

Proper Use

The device is designed for the remote switching of devices via
the GSM network as well as the remote retrieval of status
information of the inputs and the generation of SMS messages
after status has changed at the inputs. A different utilisation of
the device other than the one described above is not allowed.

Introduction

The STD32 is a telemetry module which is easy to install and
simple to use.
With the STD32 you can control two relays and monitor the
status of two digital inputs with one or several common mobile
phones.
27