Warning:
Before starting cleaning, maintenance and removal of faults, pull the mains plug out of
the socket and close the water-tap!
Emergency draining
If the programme is interrupted by a malfunction or in some other way the water
remaining in the machine can be removed through a hose.
1
1
• Use a coin to remove the cover disc from this drain lock cap.
• Once the hose has been folded out to its full length the water in the machine can
Important: If the failure occurs during the heating phase it is essential that you allow
• Replace the hose into the rear of the cap.
Cleaning the drain pump
The drain pump must only be opened, when the machine is empty.
• Press in the outer ring of the locking plug (see Pic 1)
• and turn anticlockwise 1/4 turn (see Pic 2).
• in order to close, turn drain fi lter twice to the right
38
be drained out into an appropriate container.
the water to cool before draining to avoid the danger of scalding.
Warning
Cleaning of drain pump only necessary in case of faults.
Press once again and turn another 1/4 turn, to release the plug.
(turn - push - turn).
Problem checks