Publicité
All manuals and user guides at all-guides.com
FastTrak SX4100 Quick Start Guide
7.
Press the arrow keys to move to Disk Assignments. Press the spacebar to
toggle between N and Y for each available drive.
Assign the appropriate number of disk drives to your array. Refer to the chart
below:
A disk drive that is not assigned to an array can be set to function as a Hot
Spare Drive.
8.
Press Ctrl-Y to save your array configuration.
9.
Press Esc to exit to the Main Menu. Press Esc again to exit the Utility.
10. Press Y to confirm the new array and restart the computer.
You have successfully created a new RAID array.
You must partition and format your new array before you can use
it. Partition and format arrays as you would any other fixed disk
added to your computer system.
Step 5: Install Software Drivers
Drivers for the Windows operating systems are included on the driver diskette
that came with your FastTrak Controller Card. Download the latest drivers from
the Promise website at www.promise.com.
Windows systems usually recognize the FastTrak Controller, and perform the
driver installation automatically after prompting you for the CD or diskette.
To install the FastTrak Controller manually, see Chapter 4 of the FastTrak
SX4100 User Manual on the software CD.
Drivers and installation instructions for other operating systems are available for
download from the Promise website at www.promise.com.
Level
Number of Drives
RAID 0
1, 2, 3 or 4
RAID 1
RAID 10
RAID 5
JBOD
1, 2, 3 or 4
2 only
4 only
3 or 4
Important
8
Publicité
