Publicité
Using the light on/off
function
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicator if desired.
1
Touch the light dimming button
once, the air quality light will be
dimmed.
2
Touch the light dimming button
again, the air quality light will go off.
3
Touch the light dimming button
for the third time, all lights will be on
again.
Switching the display
mode
Note
• This function is only applicable for
AC2889.
The air purifier has dual display mode,
IAI display and PM2.5 display.
1
Touch the light dimming button
for 3 seconds to switch to PM2.5
display mode (Fig.s).
»
blinks twice.
» The actual PM2.5 level displays
on the screen.
2
Touch the light dimming button
for 3 seconds again to switch back
to IAI display mode (Fig.t).
»
blinks twice.
» The IAI level displays on the
screen.
All manuals and user guides at all-guidesbox.com
5 Cleaning
• Always turn the air purifier off and
unplug from the electrical outlet
before cleaning.
• Never immerse the air purifier in water
or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the air purifier.
• Only the pre-filter is washable.
The HEPA and AC air filters are not
washable.
• Do not attempt to clean the filters or
air quality sensor with a vacuum.
Cleaning the body of the
air purifier
Regularly clean the inside and outside
of the air purifier to prevent dust from
collecting.
1
Use a soft, dry cloth to clean both
the interior and exterior of the air
purifier.
2
The air outlet can also be cleaned
with a dry, soft cloth.
Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
purifier.
Note
EN
13
Publicité
