Publicité
®
R&S
Scope Rider RTH
● Offset
Offset range depends on input sensitivity:
– Input sensitivity ≥ 40 V/div: 0
– Input sensitivity ≥ 1 V/div to ≤ 20 V/div: ±200 V
– Input sensitivity ≤ 500 mV/div: ±4 V
Horizontal system
● Timebase range: selectable between 1 ns/div and 500 s/div
● Timebase accuracy: ±10 ppm
Acquisition system
● Maximum realtime sampling rate
1 / 2 / 4 channels active: 5 / 2.5 / 1.25 Gsample/s respectively
● Acquisition modes: sample, high resolution, peak detect, average, envelope
● Max. acquisition length
1 / 2 / 4 channels active: 500 / 250 / 125 ksample/channel respectively
Trigger system
● Trigger modes: auto, normal, single
● Trigger types:
– Standard: edge, glitch, width, TV/video (PAL, NTSC, SECAM, PAL-M)
– Optional: TV/video (DTV and HDTV), pattern, state, slew rate, window,
runt, data2clock, serial pattern, timeout, interval, protocol
● Trigger level ±4 div from center of screen
Analysis features
● 4 active automatic waveform measurements
● Cursor measurements
● Mask testing with up to 5 simultaneous masks
● Waveform mathematics
● Data logger
● True RMS Digital Multimeter (R&S RTH1002 only)
– Resolution: 4 digits, 10,000 counts
Getting Started 1326.1561.02 ─ 05
All manuals and user guides at all-guidesbox.com
Preface
Main Specifications
7
Publicité
