Operations; Notice Before Using; Operation Instructions - AQUALUX 106003 Manuel D'installation Et D'utilisation

2. Operations

2.1. Notice before using

① The user is advised to start the water pump before the heat pump, and turn off the
heat pump before the water pump for long life circle.
② Check firstly for any water leakage of piping connection, then power on, press the
ON/OFF button of the heat pump, and set suitable temperature.

2.2. Operation instructions

Symbol
Note:
① You may set the desired water temperature from 18 to 35℃.
② The
on the right shows the inlet water temperature. The
the set temperature by pressing
③ After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30
seconds, the compressor will start to run.
④ During heating, the
2.2.1. Mode selections
①
will be light as standard when you turn on the heat pump.
Designation
Power ON/OFF Press to power on or off the heat pump
Mode Press to select Smart/Silence mode
Up/ Down Press to set desired water temperature
will be light.
Operation
buttons at the same time.
- 22 -
For users
on the left shows