Publicité
GRINDING
1
Attach the grinding
guard 1
to the tool
and align it, so that the operator is pro-
tected from sparking.
Caution! Make sure the tool is
switched off and unplugged.
DEPRESSED GRINDING WHEEL
3
Install the wheel with its raised centre
facing the machine. Install the outer
flange
8
with the smaller side facing
the grinding wheel.
CUTTING
1
Attach the cutting guard
2
to the tool
and align it, so that the operator is pro-
tected from sparking.
Caution! Make sure the tool is
switched off and unplugged.
CUTTING WHEEL
3A
Install the cutting wheel with the larger
side of the outer flange
8
facing the
cutting wheel.
Tighten the outer flange with the
wrench, while pressing the spindle lock
button 10.
ON / OFF
1
To switch on the tool, push safety le-
ver
6
forward and press the on / off
switch 5.
124
EN
2
Close the guard release lever. Securely
tighten the grinding guard
1
with the
wrench.
Tighten the outer flange with the
wrench, while pressing the spindle lock
button 10.
2
Close the guard release lever. Securely
tighten the cutting guard
2
with the
wrench.
DEPRESSED CUTTING WHEEL
3B
Install the wheel with its raised centre
pointing towards the machine and the
larger side of the outer flange
8
fac-
ing the cutting wheel. Tighten the outer
flange with the wrench, while pressing
the spindle lock button 10.
To switch off the tool, release the on /
off switch 5.and let the wheel come to
standstill without applying pressure to
its surface.
1
1. 1.
1. 1.
2. 2.
3
1
1. 1.
2. 2.
3A
3a
1
1. 1.
2. 2.
2
1. 1.
2. 2.
2
2. 2.
1. 1.
3B
EN
125
Publicité
