Battery Replacement - Bigben BTLSWBEAR Mode D'emploi

Colour selection button: When the light is on, press this button to choose your favorite color
Colour selection button: when the light is on, press this button scroll through your favorite
White colour button: press this button and the speaker will display white colour.
Previous button: when the Bluetooth or USB key is connected and music is on, press this
button to select previous music.
Next button: when the Bluetooth or USB key is connected and music is on, press this button
to select next music.
Pause and play: when the Bluetooth or USB key is connected and music is on, press this
button to play or pause the music.
When the Bluetooth or USB key is connected and music is on, press the "-" to reduce
volume, press "+" to increase volume.
BATTERY REPLACEMENT (FOR REMOTE CONTROL)
• If remote control fails to activate the light, replace the battery.
• Move the slot besides the battery cover to right side, then the battery cover will pop out. Then take
out the battery and replace a new one. Replace with a 3V CR2025.
• Pay attention to the polarity of the battery when installing them back to the remote control.
Warning!
• Make sure that battery is inserted the right way and with the right polarity
• Remove exhausted battery from the product
• The supply terminals should not be short-circuited
• Dispose of battery safely