Accessories - Dedicated Micros Dennard DTX1000 Manuel D'installation

OTHER PRODUCTS IN THE DEDICATED MICROS
RANGE OF TELEMETRY EQUIPMENT
Telemetry Receivers
Dennard drx 300
Dennard drx 400
Dennard drx 400dc Pan, Tilt, Zoom, Focus, Iris, Three Auxiliaries and Sixteen Presets a.c. Eight
Telemetry Transmitters
Dennard dtx 300
Dennard dtx 400
Dennard dtx 400pj Single Channel Transmitter with Presets Support and Proportional Joystick
Dennard dtx 500
Dennard dtx 1000
Dennard dtx 1000pj Preset Support, Two Monitors, Video Switching, optional proportional joystick
(Base Units)
Dennard dtx 1000/8 Eight Channel with optional 20 mA current loop Telemetry Signals.
Dennard
dtx 1000/16
Dennard dtx
1000/AL8
Dennard dtx
1000/AL16

Accessories

Dennard dtx LD
RS232
Dennard drx 24 a.c.
psu
Dennard DTX1000 Installation Manual
Pan, Tilt, Zoom, Focus, Iris and one Auxiliary a.c. Receiver.
Pan, Tilt, Zoom, Focus, Iris, Four Auxiliaries and Sixteen Presets a.c. Receiver.
Alarms d.c. Receiver.
Single Channel Transmitter "Up the coax" or 20 mA current loop Telemetry
Signals.
Single Channel Transmitter with Presets Support, "Up the coax" or
20 mA current loop Telemetry Signals.
and "Up the coax" or 20 mA Current Loop Telemetry Signals.
Eight Channel Transmitter with Presets Support ,One Alarm input, One
Monitor, Video Switching and "Up the coax" Telemetry Signals. (Keyboards)
Multi-Channel Transmitter comprising Keyboard & Base Unit,
and "Up the coax Telemetry Signals. This system is available in four main
variants as follows:-
Sixteen Channel with optional 20 mA current loop Telemetry Signals.
Eight Channel, Sixteen Alarm inputs with optional 20 mA current loop
Telemetry Signals.
Sixteen Channel, Sixteen Alarm inputs with optional 20 mA current loop
Telemetry Signals.
Keyboard Line Driver
24 Volt a.c. Power Supply for converting standard 230 Volt a.c. receivers
to 24 Volt a.c.
Page. 16