Auxiliary Control Buttons; Self Test; Iris Level Programme - Dedicated Micros Dennard DTX1000 Manuel D'installation

Auxiliary Control Buttons

There are four auxiliary function buttons on the Dennard dtx1000 keyboard as shown below.
Their functions are as follows:
wash -
wipe -
autopan -
aux -

Self Test

To activate the self test feature for any particular camera receiver, Select the appropriate camera
using the CAMERA SELECT buttons., then press the set button to display the Menu. To call menu
option 2 (Self Test) operate the CAMERA SELECT 2 button, the screen text will clear and Self
Test will be activated. See the Dennard drx series Telemetry Receiver Handbook for more detail.
START SELF TEST
Iris Level Program
To preset the iris aperture, press IRIS open or IRIS close until the desired level is reached, then
press the set button to display the menu. To call menu option 3 (Iris Set) operate the CAMERA
SELECT 3 button, the screen text will clear and the iris level will be set.
IRIS SET
Note: The programming operation should be completed in under 15 seconds as there is an in built
safety feature which returns the iris to the default setting if an instruction is not received within this
period.
Dennard DTX1000 Installation Manual
Press and hold for the desired wash period
Press on/press off
Press, LED lights and the autopanning function begins. Press Pan
Left or Pan Right to stop
Press on/press off
UP TO
and
THEN THEN
THEN THEN
Page. 8