Publicité
User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which
may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 - 240
VAC. For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan
type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and
ensure it is firmly secured in place and does not detach by pulling before installing into a power socket.
To reduce risk of fire, electric shocks or damage:
▪
Do not open the product nor its power supply. There are no user serviceable parts inside.
▪
Only qualified servicing personnel may carry out any repairs or maintenance.
▪
Never use damaged cables.
▪
Do not expose the product to water or places of moisture.
▪
Do not use this product outdoors it is intended for indoor use only.
▪
Do not place the product near direct heat sources. Always place it in a well-ventilated place.
▪
Do not place heavy items on the product or the cables.
▪
Please ensure any adapters are firmly secured and locked in place before inserting into a wall
socket.
▪
This product has no grounding and is only intended for use with unearthed or double-insulated
appliances.
Introduction
Thank you for purchasing the 2 Port USB Type A Smart Travel Charger. This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
Package Contents
▪
2 Port USB Type A Smart Travel Charger, 10.5W
▪
Lindy Manual
Instructions for Use of Power Supply
NOTE: This product may not work with certain high-power appliances such as hair dryers. Please check
the appliance label to make sure it requires less than 6A.
USA
Press the button and slide until it is below the USA/AUS text. Make sure the contact blades are turned to
the parallel position.
Australia/New Zealand
Press the button and slide until it is below the USA/AUS text. Make sure the contact blades are rotated
to "\/" position.
United Kingdom
Press the button and slide until it is below the UK text. Pull the insulated ground pin out of the housing.
Europe
Please ensure the button is in the centre and then press for European plug to pop out. Straighten the
connectors until they click into position.
All manuals and user guides at all-guides.com
English
Publicité
