Publicité
ASSEMBLY INSTRUCTIONS:
NOTE: Before using the appliance for the first time, thoroughly clean the
appliance and accessories and let them dry completely. See chapter "Cleaning
and maintenance".
The appliance must be fully assembled before first use and operation. Grilles
and blades must be mounted correctly before the operation. Check that the
appliance is not damaged before each use. No use incomplete or damaged
equipment.
• Insert the two parts of the crossbar base (step 1).
• Align the mounting holes and mount the outer pipe on the cross base. Fix the outer
pipe in place with screws (steps 2 - 3).
• Loosen the pipe lock nut and remove it from the outer pipe (steps 4 - 5).
• Attach the base cap to the base (step 6).
• Replace the pipe lock nut on the outer pipe. Pull out the inner pipe and adjust it
at the desired height. Then tighten the pipe lock nut (steps 7 - 9).
• Slightly loosen the lock knob, if necessary, and mount the main body
on the outer pipe. Tighten the lock knob to secure the main body in position (steps 10 -
11).
11
Publicité
