Bibby Scientific stuart RE3022C Mode D'emploi page 5

Maintenance
Periodically clean the pump with a damp cloth
and a mild detergent solution
This vacuum pump is 100% oil-free. All bearings
are sealed for life and permanently lubricated.
Lubrication should not be attempted.
It is recommended that any servicing or repair is
only undertaken by suitably qualified personnel.
Only spare parts supplied by Stuart or its agent
should be used. Fitting of non-approved parts
may affect the performance of the safety
features of the instrument.
If in doubt, contact the Technical Department of
Bibby Scientific Ltd.
Tel: +44 1785 812121
Fax +44 1785 813748
The following spare parts are available from your
laboratory supplier. For a comprehensive parts list
please contact the Service Department quoting
model and serial number.
Description
Catch pot
Catch pot seal
Cat. No.
RE3022C/1
RE3022C/2
Warranty
Bibby Scientific Ltd warrants this instrument to
be free from defects in material and
workmanship, when used under normal
laboratory conditions, for a period of three (3)
years. In the event of a justified claim Bibby
Scientific Ltd will replace any defective
component free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage by
installation adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.
Bibby Scientific Ltd.
Beacon Road
Stone, Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 813748
e-mail info@bibby-scientific.com
www.bibby-scientific.com
3