Party Light & Sound PARTY-SPEAKY500 Manuel D'utilisation page 3

Remote control
1. ON/OFF button
2. Mute
3. Repeat
4. VOL+
5. Play/pause
6. Previous/backwards
7. Next/Forward
8. VOL-
9. No function
10. EQ (Pop, rock, jazz, classic)
11. No function
12. Input selector
13. Direct access
Note: Press the MENU button on the top panel and adjust the bass and treble via the remote control.
Rear Panel
1. Audio input R/L
2. Power ON/OFF
3. LED illumination ON/OFF
4. Mains input connector
5. FM antenna
Using the Microphone
1. Switch the unit on.
2. Plug the supplied microphone into the MIC1 or MIC2 socket on the top control panel.
3. Set the volume and the echo effect with the M.VOL and ECHO controls.
FM Function
1. Switch the unit on
2. Press the INPUT button on the front panel until FM is displayed.
3. Keep the PLAY button pressed to start an auto search for FM radio stations. The found stations are
automatically stored in the memory. Use the  and  buttons to go to the last or to the next radio station.
Using a wireless audio source
1. Switch the unit on.
2. Press the INPUT button on the top control panel until "BT" is displayed.
3. Search for Bluetooth devices on your smartphone and select PARTY-SPEAKY in the list of found devices.
4. Now you are ready to play your music through the speaker. You can use the controls on your Bluetooth
device or on the speaker to set the volume
Playing music from a USB stick or an SD card
Switch the unit on
Insert your USB stick or SD card
The music starts playing automatically.
Use the previous/next/play/pause buttons to control your music.
Please note: The unit supports MP3 files.
The maximum capacity of USB/SD media is 32Gb.
The reaction speed of the player depends on the quantity and weight of the MP3 files on your media.
©Copyright LOTRONIC 2017 PARTY-SPEAKY500 3