Publicité
10.3.1 Releasing excess pressure
Release the excess pressure by switching
off the compressor and using the com-
pressed air which is still left in the pressure
vessel, e.g. with a compressed air tool run-
ning in idle mode or with a blow-out pistol.
10.4 Transport (fig. 1)
The compressor can be transported by
tilting to the wheels.
10.5 Ordering replacement parts
Please quote the following data when or-
dering replacement parts:
• Type of machine
• Article number of the machine
11. Disposal and recycling
The unit is supplied in packaging to pre-
vent its being damaged in transit. This
packaging is raw material and can there-
fore be reused or can be returned to the
raw material system.
The unit and its accessories are made of
various types of material, such as metal
and plastic. Defective components must
be disposed of as special waste. Ask your
dealer or your local council.
22
GB
Publicité
