Robern CRAFT Serie Instructions D'installation page 8

FINAL ASSEMBLY
4. Press the Shelf Hole Plugs [SS143] into the unused holes inside the cabinet. Place the Screw Head Caps [SS672] over any exposed
screw heads.
5. Install Robern Logo Coverplate [211-1329] into unused electrical access hole.
6. Insert clear right-hand [211-1376] and left-hand [211-1377] shelf clips into the holes in the back channel on the sides of the cabinet.
7. Push the back of the shelf into both the left and right shelf clips (A). Snap the shelf down into the shelf clips (B).
4
6
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation instructions
5
7
8
A
B
Part no. CB-209-1439 5/10/22
Craft Series Cabinet