Robern CRAFT Serie Instructions D'installation

CRAFT SERIES
INSTALLATION INSTRUCTIONS*
Important safety instructions - Save these instructions
(RC) Round Corner Metal (TF) Thin Frame Metal (ND) Industrial Metal
CONTENTS
Safety - 2
Tools needed - 3
Parts - 3
Accessories - 4
Dimensions - 5
Recess Mounting - 6
Final Assembly - 9
Use and Maintenance - 10
Warranty - 10
GENERAL INFORMATION
This instruction manual contains information on how to recess mount the Craft Series cabinet. This series comes in different sizes and
door styles. Refer to the specification sheet matching the model number for dimensions.
Read the specific instruction for how your cabinet will be mounted. The cabinet can be surface mounted* or recess mounted.
Save these instructions for future use and reference. An improper installation voids the warranty. Installed cabinets cannot be returned.
If you experience any problems with your cabinet, contact your dealer or Robern directly.
Limited Warranty — One Year Term
* For surface mounting and accessory installation instructions, see page 4.
Part no. CB-209-1439 5/10/22
Craft Series Cabinet
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
1
Installation instructions