Publicité
INSTALLATION
PI300-SD was designed to be quick and easy to set up and to use. Please follow these
simple instructions to get your covert DVR up and running in just a matter of minutes.
Powering your PI300
1.
Connect the included AC adapter to conventional AC outlet.
2.
Connect AC adapter to AC Jack (10) on the back side of PI300.
Remove the rear panel
1.
Using the included Allen Key, remove the Release Screw.
2.
Use your thumb to pull the rear panel away from the main unit.
Connect your PI300 to a TV
1.
Connect the included RCA cable to the RCA Jack (1) on the back of the PI300.
2.
Connect the RCA cable to the Yellow RCA Composite Video Input Jack of
your television.
View your PI300 on a TV
1.
Once you have connected your PI300 to your TV, power both units on.
2.
Set your TV's input source to VIDEO, AUX or whichever source is required for
viewing your connected devices.
PI300-SD
All manuals and user guides at all-guides.com
RELEASE SCREW
ALLEN KEY
6
Publicité
