Publicité
DVR SETTINGS
Factory Default
This option allows you to set your PI300 back to its factory default settings, precisely the way the
unit came out of the box.
To set factory default:
Select the factory default option from the main menu. You will be prompted: "RECALL DEFAULT
1.
NOW?"
2.
To restore your PI300 to factory default press the joystick button to signal yes.
3.
To cancel resetting your PI300 to factory defaults, press the "STOP" button to cancel.
Reinstall the rear panel
1.
To disguise and limit access to the control panel, reinstall the rear panel.
2.
Using the included Allen Key, tighten the Release Screw to secure the rear panel.
CAMERA SPECIFICATIONS
Image Sensor
Resolution
Outdoor Use
Focal Length
Focus Type
Min. Illumination
PI300-SD
All manuals and user guides at all-guides.com
1/6" Color CMOS Sensor
640 x 480
No
Board Lens f3.62mm / F2.8
Fixed
2 lux
System Status Menu
Motion Detection
Viewing Angle
BLC
AGC
White Balance
Signal Noise
Yes
66 Degrees
Auto
Auto
Auto
46 dB
16
Publicité
