Publicité
SERVICE AND ADJUSTMENTS
TRANSMISSION
TINE
3-1/2" MAX
SHEAR PIN
SHARP
EDGE
ENGINE
TO AD JUST CARBURETOR
The carburetor has been preset at the factory and ad just-
ment should not be necessary.
tine_2
TINE
Fig. 25
SHEAR PIN
SHARP EDGE
tine_12
SHARP
EDGE
HAIRPIN CLIP
SHARP
EDGES
Fig. 26
IMPORTANT: NEVER TAMPER WITH THE ENGINE GOVERNOR,
WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVER-
SPEED ING THE ENGINE ABOVE THE FACTORY HIGH SPEED
SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-
GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR
NEAREST AUTHORIZED SERVICE CENTER/DEPARTMENT,
WHICH HAS THE PROPER EQUIP MENT AND EXPERIENCE TO
MAKE ANY NEC ES SARY ADJUSTMENTS.
18
COUNTER
TINE
ROTATION
SHARP EDGE
Publicité
