Publicité
Assembly
4
Attaching the Shelf
□
Attach the Shelf (C) to the bottom of the Leg Panels (B).
□
Align the pre-drilled holes in the Leg Panels (B).
□ □
Partially tighten 4 Bolts (AA) through Shelf (C) holes into Leg holes as shown in figure below.
□ Once shelf is installed, go back and tighten all 28 Bolts (AA) in the 4 leg corners and shelf.
5
Attaching the Cord Storage hooks
□
Position the Cord Storage Hook (E) over the holes on the Workbench (A).
□ Attach the Hooks (E) using 4 Bolts (AA) and tighten with supplied hex key (BB).
AA
8
E
AA
Publicité
