Publicité
Assembly
CAUTION: Two people are recommended for assembly.
1
Attaching the Leg Panels to the Workbench
□
Attach the Leg Panels (B) to the side of the Workbench Table (A).
□
Align the pre-drilled holes in Table with holes in top of Legs.
□ Partially tighten 12 Bolts (AA) with supplied hex key (BB) through each Leg into the table as shown in the figure below.
Do not fully tighten all bolts until Step 4.
2
Attaching the Casters
□ Attach the four Casters (D) to the Leg Panels (B) and tighten with a 24mm wrench or socket (not included).
D
6
A
AA
B
B
Publicité
