Publicité
7. Power strip
□
SDL-6D outlet,rating:15A,125VAC 60Hz 1875W,
USB: USB-A and USB-C 5V DC, 2.1A, 10.5W.
□
That the LED light on the power strip is for the surge
protection indicator and is turned off when the LED light is off.
□
Indoor only.
□
Operating Temperature: 5º F to 104º F
8. Extension cord
□
Follow all manufacturers' Warnings and Operating
Instructions for your extension cord.
□
Do NOT insert extension cord through hole without grommet
in place.
□
Only use a three-wire extension cord with all three prongs
intact. Never remove the round grounding prong.
□
Extension cord must be connected to a 125 Volt GFCI
protected outlet with proper ground. If GFCI outlet is not
available, use an extension cord with GFCI protection
built in.
□
Check the insulation and plugs of extension cord before
using. Do NOT use cord if it is worn or damaged.
□ Do NOT overload extension cord.
□ Remove extension cord from the wall outlet
before moving or transporting the workbench.
□ Only use an extension cord that is rated for outdoor use.
□ Do NOT connect extension cord to outlet that also sup-
plies critical safety equipment with power.
9. Electrical Shock Hazard
□ Do not plug cord into outlet with wet hands.
□ Do not use this tool chest near a bathtub, a shower, or a
swimming pool.
□ Chest/Cabinet plugs must match the outlet.
□ Never modify the plug in any way.
□ Do not use any adapter plugs with earth (grounded) chest
power strips.
□ Unmodified plugs and matching outlets will reduce the risk
of electric shock.
□ Avoid body contact with earthed or grounded surfaces. There
is an increased risk of electric shock if your body is earthed or
grounded.
CAUTION: RISK OF ELECTRICAL SHOCK: Make sure all
cords are unplugged before any servicing or cleaning.
3
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM
Publicité
