Clean Air Optima CA-606 Mode D'emploi page 6

Masquer les pouces Voir aussi pour CA-606:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
Power Button:
Press the Power Button to activate the humidifier. The machine is now operating in manual
mode. It will release cool mist on a constant basis with the mist intensity level automatically
set to medium.
Manual Button:
The Manual Button changes the mist level (low, medium, high). There are 3 levels of mist
output available.
Child Lock:
Child lock protects from unwanted use of the device.
The Child Lock is switched on / off by pressing the Manual Button for 3 seconds.
If the child lock is switched on, a red lock icon
Humidity Button:
Pressing the Humidity Button, you can select the desired humidity level by pressing
this button repeatedly until the required humidity level is displayed (from 40% to 80% in
increments of 5%). Once you select your desired humidity level, simply stop pressing the
button and your humidity level will be set.
When the humidity level in the room reaches the set humidity level, the machine will go into
automatic sleep state and stop producing mist. When the room's actual humidity level drops
below your set humidity level, then the machine will start producing mist again.
Auto Mode:
When automatic mode is activated, the unit will automatically select the level of relative
humidity and keep it between 55% and 68%.
The Auto Mode is switched on / off by pressing the Humidity Button for 3 seconds.
6
appears in the display.

Publicité

Table des Matières
loading

Table des Matières