Hilti TE 30 Mode D'emploi page 19

All manuals and user guides at all-guides.com
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 Description of the device
3.3.1 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which reduces vibration noticeably.
3.4 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
Note
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.group.
4 Technical data
Note
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight in accordance with EPTA proce-
dure 01
Ø hammer drill bits
Ø drill bits for wood
Ø drill bits for metal
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Sound (power) level (L
Uncertainty for the sound power level
(K )
WA
Sound pressure level (L
Uncertainty for the sound pressure level
(K )
pA
Printed: 29.05.2017 | Doc-Nr: PUB / 5070837 / 000 / 04
TE 30
4.0 kg
5 mm ... 28 mm
5 mm ... 20 mm
3 mm ... 13 mm
TE 30
) 101 dB(A)
WA
3 dB(A)
) 90 dB(A)
pA
3 dB(A)
TE 30­AVR TE 30­C­AVR
4.2 kg 4.2 kg
5 mm ... 28 mm 5 mm ... 28 mm
5 mm ... 20 mm 5 mm ... 20 mm
3 mm ... 13 mm 3 mm ... 13 mm
TE 30­AVR TE 30­C­AVR
101 dB(A) 101 dB(A)
3 dB(A) 3 dB(A)
90 dB(A) 90 dB(A)
3 dB(A) 3 dB(A)
Spare parts,
English 13