Publicité
All manuals and user guides at all-guides.com
EN
Step 3
Remove the nut and washer from the wheel hub. Push the axle (9) through the
wheel hub. Refit the nut and washer. Check the tight fit of the nut at regular
intervals.
Step 4
Connect the pull rod with the handle element (4) and the intermediate piece
(5). Use the 5.5 cm M8 screw (15). Now connect the assembled drawbar to the
frame (2). Use the two 6 cm M8 screws (14) for this.
15
Publicité
