Publicité
The Skimmer can be operated with ozone up to max. 50 mg/h per pump. One air connection of the ozoniser should be connected via
a suitable silicon hose to the protein skimmer pump. The air is automatically sucked in the ozoniser by the skimmer pump. Should
the skimmer performance deteriorate please check the ozoniser for blockage.
If the skimmer is used with new water on an aquarium it is common for you to find an excessive quantity of small bubbles produced
and often the skimmer cup fills with a clear liquid. This is due to the high surface tension of the new water which prevents the
bubbles from bursting. Once the water matures this effect will do away but can take up to 2-3 weeks. The effect is different on
different salt brands and is often dependant on levels of conditioning agents added to the salt. Once these are skimmed out then the
skimmer will act normally.
Heavier feeding in the initial stages will give the chemically pure water something to react with and allow it to mature into proper
aquarium salt water rather than the initial chemical soup which is new salt water.
technical
TC 1655
technical
TC 1655
All manuals and user guides at all-guides.com
Operation with Ozone
Dimensions
Footprint
data
Footprint
with Pipe
work
290x190
372x192
Power consumption
Watt
data
min.
max.
12
Fresh salt water
Technical Data
mm
Height
height
under
stocking
outlet pipe
570
253
1200
Air
litre/h
min.
max.
Feed line
800
-14-
Aquarium size
Water flow rate
litre
litre/h
high
normal
min.
max.
stocking
1000
1500
Connections Ø
mm
Outlet
25
40
EN
Publicité
