Safety Instructions; Technical Data - Festool APS 900/2 Notice D'utilisation Originale

English
Contents
1 Symbols..................................................... 10
2 Parts of the device/scope of delivery........10

3 Safety instructions.................................... 10

4 Intended use..............................................10

5 Technical data........................................... 10

6 Set-up/start-up......................................... 10
7 Working with the worktop template......... 11
8 Routing panel joints.................................. 12
9 Maintenance and cleaning........................ 12
10 Accessories............................................... 12
11 Environment.............................................. 12
1 Symbols
Warning of general danger
Read the operating instructions and
safety instructions.
Wear breathing protection.
Tip, advice
Handling instruction
Do not dispose of with domestic waste.
2 Parts of the device/scope of
delivery
[1-1] Routing template
[1-2]
MFS-VP 1000 aluminium profile
[1-3] 2 x panel joint templates
[1-4]
3 x bolts
[1-5] 4 x slot nuts and screws
[1-6] Screwdriver
Additional equipment required
– Festool FS-HZ 160 lever clamps
– Festool OF 1400 or OF 2200 router
– Festool KR-D 30.0 copying ring*
– Festool SZ-D 8.0 collet*
– Festool HW S8 D 14/20 carbide or reversi­
ble blade groove cutter
Minimum useful length of the
groove cutter = worktop thick­
ness + 5 mm
– Festool CT series mobile dust extractor
10
* Items included with the Festool OF 1400 or
OF 2200 router.
3 Safety instructions
WARNING! Read and observe all infor­
mation and safety instructions. Failure to
observe the information and safety instructions
may lead to electric shocks, fires and/or seri­
ous injuries.
Keep all safety information and instructions
for future reference.
– Use a suitable mobile dust extractor to ex­
tract the dust which is created.
– Observe all safety instructions and other
instructions in the operating manual for the
mobile dust extractor you are using.
– Observe all safety instructions and other
instructions in the operating manual for the
router you are using.
– Secure the worktop using Festool lever
clamps (accessories).
– Secure the worktop template to the work­
top using Festool lever clamps (accesso­
ries).
4 Intended use
By using the worktop template and a Festool
router, e.g. the OF 1400 or OF 2200, 90° corner
joints for worktops can be made quickly and
easily.
The worktop template is designed as standard
for worktops with a depth of 600 mm, 650 mm
or 900 mm.
Standard commercially available panel joint fix­
tures can also be routed using the worktop
template. Two sizes of panel joint fixtures may
be used: 65 mm and 150 mm.
The user is liable for improper or non-in­
tended use.
5 Technical data
APS 900/2 worktop template
Worktop template di­
mensions
Weight
6 Set-up/start-up
6.1 Installation
Attach the worktop template according to fig­
ure 2.
1000 x 380 x 16 mm
6.6 kg