Publicité
INSTRUCTIONS TO RESTORE I-BMDPL IN FUNCTIONNAL STATE
1. If not already done, reinstall the #4 chains around the shaft assembly (1)
2. Put back in place the shaft assembly (2)
3. Reinstall the three lateral plates and the brake assembly**
4. Reinstall crank assembly with 22 thoot sprocket and #5 chain. Don't forget the key
5. Reinstall cover
6. Put back in place all bolts and nuts
** it is possible that the lateral plates are difficult to install because of the chain tension. If so, loosen the bolt
linked to the long nut to reduce chain tension. Once the plates are reinstalled, tighten the bolt to restore
tension in the #1 chain.
ROLLING BASE
4
4
THIRD MAT
SECOND MAST
FIRST MAT
BASE
CRANK
ASSEMBLY
All manuals and user guides at all-guides.com
1
SHAFT
ASSEMBLY (1)
CHAIN #4
SHAFT
ASSEMBLY (2)
GYPSUM SUPPORT
1
5
CHAIN #5
GEAR
M19 NUT
2
BRAKE ASSEMBLY
COVER
M10 NUT
LATERAL PLATES
3
ROLLING BASE
4
6
THIRD MAT
SECOND MAST
FIRST MAT
BASE
CHAIN #5
GEAR
M19 NUT
CRANK
ASSEMBLY
17
Publicité
