Questions
How do I get VIERA Connect to
work on my TV?
How do I check for the latest
software (firmware) version for
my TV?
Can I use any USB WiFi adapter to
connect the TV to my wireless network?
How do I reset my TV to all factory
defaults and settings?
Can I download new apps
(content & services) into my
VIERA Connect TV?
58
All manuals and user guides at all-guides.com
1. You need a broadband (high speed) Internet service with a
2. Connect the TV to the Internet through your router by an
3. Run the "Connections Test", under the Network Settings menu.
Answers
speed of no less than 1.5 Mbps (p. 35).
Ethernet cable or a compatible Panasonic USB wireless adapter.
If Connection test fails, then check with your Internet service
provider or router/modem manufacturer if there are firewall,
content filter or proxy settings that may block the TV from
accessing the Internet.
In the main menu, select "Setup". Highlight "Network Settings"
and press OK. Select "Software Update". The current version
and latest version software will be shown. If software update
is "grayed out", the TV is not connected to the Internet. If
newer version is available, update your TV. Follow the on-
screen instructions, do not power off the TV until the update is
complete. Be patient; firmware update may take a while.
The TV's internal software was designed to work with
Panasonic's wireless adapter model DY-WL10*.
Check www. panasonic.com/NetConnect for updated
information.
In the main menu, select "Setup". Highlight "Reset to Defaults"
and press OK. Enter your password (if created earlier) or
create a temporary new password. Select Yes to reset the TV.
No. From time to time, Panasonic will add new quality apps
into VIERA Connect. Your TV will be notified automatically
when new apps are available. Just leave your TV connected
to the Internet. When asked, approve the firmware update to
enjoy new functionality downloaded to your TV.
* Model number is subject to change without notice.