Publicité
COnneCting a DeViCe tO tHe gaLaXy DOCK
How to connect a device to the Galaxy Dock.
LAN
WPS
AUX IN
ONLY FOR
SERVICE
USB 5V 500mA
POWER
1. The GAlAxy DOCK is located on the back of the product. To open, push it in gently.
2. Press the
button on the top panel of the Wireless Audio with Dock repeatedly until the
display.
• Each time you press the button, the selection changes as follows :
;
;
• The selected mode is displayed in white in the Function Display.
3. If you have a Samsung Galaxy Phone device, connect the device to the 5 pin (smaller) connector to connect to the
LAN
WPS
AUX IN
ONLY FOR
SERVICE
Galaxy Dock. If you have a Samsung Galaxy Tab Device, connect the device to the 30 pin (larger) connector on the
USB 5V 500mA
Galaxy Dock.
POWER
4. Lift the device support up as shown to prevent the device from sliding or falling off the Galaxy Dock.
`
Turn on your Samsung Galaxy device before you docking it to the Galaxy Dock.
`
This unit doesn't support the simultaneous docking of Samsung Galaxy Phone and Samsung Galaxy Tab
Device.
`
Connect your Samsung Galaxy device to the Galaxy Dock before starting Docking mode. (See page 23)
PUSH
WPS
PUSH
WPS
;
;
;
LAN
AUX IN
ONLY FOR
SERVICE
USB 5V 500mA
POWER
LAN
ONLY FOR
AUX IN
SERVICE
USB 5V 500mA
POWER
PUSH
LAN
WPS
USB 5V 500mA
POWER
icon appears in the
English
AUX IN
ONLY FOR
SERVICE
13
Publicité
