Publicité
Operating Instructions
Control Panel Features
NOTE: The following control panels
purchased may be slightly different according to the models. Your machine may not contain some indicators or
buttons. The actual shape shall prevail.
n I
d
c i
t a
r o
F
u
n
t c
o i
Wireless light
Bucketless Mode
When you push the button to change operation
modes, the unit will make a beep sound to indicate
that it is changing modes.
Power button
Press to turn the dehumidifier on and off.
Note: When the compressor startups or stops running,
the unit may make a loud voice, it is normal.
Mode button
Press to select the desired operation mode from
Continuous dehumidifying,Dryer/Max (model dependent),
Smart dehumidifying (on some models) and Setting
dehumidifying.
In Setting dehumidifying mode, on some models the set
indicator light illuminates. On some models, the unit
without setting dehumidifying indicator light. When
are for explanation purpose only. The control panel of the unit you
n
Low
High
Bas
Haut
Low
High
Bas
Haut
n I
d
c i
t a
r o
F
u
Filter clean light
Pump light (for pump model only)
the Continuous, DRY, Smart indicator lights turn dark,
the unit is at the setting dehumidifying mode.
Note: In Continuous dehumidifying, Dryer and Smart
dehumidifying modes, the humidity setting can't be
adjusted.
Bucketless mode (on some models)
The dehumidifier can be used without bucket. When
the unit is on, the LED DISPLAY shows"Eb". Press and
hold FILL LEVEL button and UP button for 3 seconds in 3
minutes to shield "Eb" malfunction, and the bucketless
mode indicator light illuminates. Press and hold FILL LEVEL
button and UP button to exit Bucketless mode, the
bucketless mode indicator light turns dark.
Note: In Bucketless mode, the unit should operate with
a hose to drain away water.
In Bucketless mode, the bucket capacity can't be selected
and the unit can't turn on PUMP feature.
n
t c
o i
n
Page 5
+
Publicité
