Publicité
Operation
NOTE: The fixture has with an internal dimmer.
Do not connect the fixture to an external
dimmer. Doing so may prevent the fixture from
operating as intended.
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Remote Control
NOTE: The light switch must be on in order to
control the light fixture with the remote control.
BUTTON FUNCTIONS
Power ON/OFF.
OFF: Turns off all the lights.
Other remote buttons cannotbe used in the off state.
ON: Turns the lights on and returns it to the last settings used.
Turn the flush mount and track heads on at the same time
at 100% brightness.
Turn only the flush mount on (100% brightness).
Turn only the track heads on (100% brightness).
Dim the light up (brighten).
Dim the light down.
OPERATION WITHOUT REMOTE:
If the remote is lost, the light can still be operated at factory settings. To operate the fixture without a
remote, turn off the light switch leading to the fixture. Leave the fixture off for 90 seconds, then use
the switch to turn the fixture back on. The track and flush mount lights will come on together. Until the
remote is recovered, the light switch can now be used to operate the fixture.
PAIRING FIXTURES
If the fixture is not paired with the remote out of the box, follow these steps:
You must be within an unobstructed distance of 2 – 3 meters (6-10 feet) to pair your remote to
your light fixture.
Long press the ON/OFF key for 5 seconds. The red indicator on the remote will flash three
times, indicating that the fixture has been paired.
DISCONNECTING FIXTURES
Long press the ON/OFF key for 5 seconds. The red indicator on the remote will flash five times,
indicating that the fixture is no longer paired to the remote.
OPERATING DISTANCE
An unobstructed remote can function up to a distance of 6 – 9 meters (20 – 30 feet).
NOTE: The light switch must be on in order to
control the light fixture with the remote control.
NOTE: Requires two AAA batteries (not
included).
NOTE: The remote control can pair 1 to 4
lights, but each fixture needs to be paired
individually (power the fixture on, pair it
disconnect it, and repeat for each additional
fixture).
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Publicité
