Publicité
Installation (continued)
3
Securing the fixture
Place the fixture (A) over the outlet box
and flush against the ceiling surface.
Align the holes on the mounting bracket
(FF) to the holes on the fixture (A).
Secure the canopy of the fixture (A) using
the canopy screws (BB).
4
Securing the remote wall mount
Place the remote mount (B) on the desired
location of your wall and mark the
mounting holes with a pencil.
Use a 0.25 in drill bit to drill the two holes
into your wall.
Tap in an wall anchor (DD) into each hole.
Align the remote mount (B) over the holes
and secure the remote mount (B) in place
using the anchor screws (EE).
BB
6
A
DD
C
B
Publicité
