Publicité
Batteries installation
1. To install the batteries, open the battery compartment located at the bottom
of the unit by pressing on the arrows and then sliding it off in the direction
indicated.
2. Insert 8 x LR14/C
indicated in the battery compartment, and as per the diagram shown below.
3. Replace the battery compartment cover.
Note: The AC adapter must be disconnected from the DC socket on the rear of
the unit in order for the product to operate on battery power.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries
are to be removed from the product before being charged. Rechargeable
batteries are only to be charged under adult supervision. Different types of
batteries or new and used batteries are not to be mixed. Only batteries of the
same or equivalent type as recommended are to be used. Batteries are to be
inserted with the correct polarity. Exhausted batteries are to be removed from
the product. The supply terminals are not to be short circuited. Do not throw
batteries into a fire. Remove the batteries if you are not going to use the unit
for a long period of time.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur,
remove the batteries and insert them again, or unplug the AC cable from the
mains socket and re-plug it again.
K7000seriesIM1284_10July_V09.indd 24
All manuals and user guides at all-guides.com
size batteries (not included) observing the polarity
24
10/07/2014 1:38 PM
Publicité
