Publicité
SAFET Y NOTES
WARNING:
To avoid the risk of product failure,
property damage, and personal injury, do the
following:
This product should be installed by a licensed pro-
fessional plumber.
This product is for use with drinking water only.
This product must not be used as a grab bar. If a
grab bar is required, install one separately.
Refer to the Cleaning Recommendations on page
15 when selecting a cleaning agent for this
product. Do not use cleaning products containing
chlorine bleach, lye, hydrochloric acid, formic acid,
acetic acid, or abrasives.
Failure to follow these instructions may result in
product failure and property damage, and may
void the warranty.
2
E N G L I S H
INSTALLATION CONSIDERATIONS
⁄ Read over these instructions thoroughly before beginning
installation. Make sure that you have all tools and sup-
plies needed to complete the installation.
This trim is for use with rough valve 06607000 (not
included).
⁄ The mounting surface must be finished and made water-
tight before installation of this trim kit.
⁄ This unit is not anti-scald. In Massachusetts, or if required
by local plumbing code, install an approved water tem-
perature limiting device conforming to ASSE 1070 (not
available from Hansgrohe).
⁄ Keep this booklet and the receipt (or other proof of date
and place of purchase) for this product in a safe place.
The receipt is required should it be necessary to request
warranty parts.
TECHNICAL INFORMATION
Water pressure
Recommended
Maximum
Hot water temp.
Recommended
Maximum
Flow rate
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
15 - 75 PSI (0.1 - 0.5 MPa)
145 PSI (1 MPa)
120°-140° F (48° - 60° C)*
158°F (70° C)*
approx. 5.6 GPM (21 L/min) @ 44 PSI
Publicité
