How To Prepare The Machine For Operation; Uncrate The Machine; Installing The Brush Or Pad Holder - Brady FM17 Manuel De L'utilisateur

HOW TO PREPARE THE MACHINE FOR
OPERATION

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect
the shipping carton and the machine for damage. If
damage is evident, save the shipping carton so that
it can be inspected. Contact the Brady Customer
Service Department.
KNOW YOUR MACHINE (Figure 1)
1 Operator Handle Grips
2 Switch Lever Safety Lock Button
3 Switch Levers - Squeeze - ON / Release - OFF
4 Handle Release Compression Lever
5 Power Cord
6 Operator Handle
7 Cord Hook
WARNING! This machine contains moving
parts. To reduce the risk of
injury, always unplug the power
cord before servicing.

INSTALLING THE BRUSH OR PAD HOLDER

Align the lugs with the corresponding slots in the
brush or pad holder and turn the brush or pad holder
counterclockwise to lock it in place (fi gure 2). To
remove brush/pad holder, give it a quick, hard turn
clockwise.
CAUTION! Using the wrong brush or pad
on this machine can damage the
fl oor or overload the motor.
®
Brady
Operator's Manual (EN) - FM Polisher
ENGLISH
1
2
5
4
Figure 1
Lugs
Slots
Figure 2
EN
3
6
7
FORM NO. 56091094 - 7 -