Publicité
How to Use:
1. Fully charge the massager before first use. Only use the charger
provided and do not use the device while charging. The power
button flashes while charging and will have a solid green light when
fully charged.
2. Choose the preferred massage head from the 3 heads included in
the package. Simply align the required head shaft with the socket
and firmly press until the shaft is fully inserted. To remove, simply
pull the attachment to withdraw from the socket.
3. Press the power button for 3 seconds to turn on the massager.
The default mode is massage mode 1 and speed intensity level 2 to
adjust the settings, simply press the massage mode and intensity
level buttons.
4. The massager is pre-programmed to run for 15 minutes and will
automatically shut off after the session. If additional session is
desired, simply restart the massager.
Note: The massager has 3 interchangeable massage heads that can
be used in different parts of the body:
A. Flat massage head for shaping of various muscle parts.
B. Double ball head for massaging the acupoints on the body.
C. W-shaped massage head for massaging arms, waist, back
buttocks, thighs.
How to Determine the Battery Capacity of the
Massager:
When the unit is off, short press the power button and check the light
indicator:
Flashing Red Light: 0-5%, (unit won't turn on)
Steady Red Light for 5 seconds: 6-20% (a prompt to charge the
unit)
06
Steady Yellow Light for 5 seconds: 21-50%
EN
Steady Green Light for 5 seconds: More than 50%
When the unit is on, just look at the power button and the color
display will show the battery capacity.
Red Light: Under 20%
Yellow Light: 20-50%
Green Light: Over 50%
Charging Port
Product Overview
Speed Intensity
Level
Power
Button
Changeable
Massage
Head
Massage
Hand
Mode
Grip
07
Publicité
