Publicité
Labels
1
CR3-EDGE
33 ft (10 m) Self-Retracting Lifeline
Convient à une utilisation avec bord coupant
2
Part #
Date of Manufacture
42010CSA
MM
Read supplied instructions before using. Failure to follow instructions
may result in serious injury or death. Never modify product. This product is not repairable.
USE This device is only for use by one person as
a fall arrester. Only make connections directly
to attachment point on safety harness. Guard
against swing-fall by keeping lifeline vertically
overhead. Ensure that connection to anchorage
is secured properly before use. Avoid lifeline
contact with sharp or abrasive edges and
surfaces. May be used as a component of a
PFAS in HLL applications. Design, installation,
and utilization of HLLs must be supervised by
a Qualified Person. Suitable for horizontal use.
Competent Person must calculate fall clearance
prior to use; fall clearance calculations must
include considerations for swing fall. Clearance
numbers specified based on lifeline installed
vertically overhead and in-line with worker.
Inspection
Date
Initials
Date of First Use
Permitted Service Temperature Range:
-40°F to 130°F (-40°C to 54°C)
Class SRL LE
DO NOT REMOVE
LABELS
PANTONE® 7549
White
C0 M32 Y100 K0
C0 M0 Y0 K0
R253 G181 B21
R255 G250 B250
#FCB414
#FFFFFF
Class
SRL LE
Anchor above or
below dorsal D-ring
CSA Z259.2.2-17
Suitable for
LEADING EDGE
PANTONE® Process Black
C0 M0 Y0 K0
R0 G0 B0
#000000
Label Stock:
MacTac REBEL 4MIL MATTE PVC HT PRINT RB528H
Laminate:
MacTac PERMAFLEX 5MIL LUSTRE CLEAR PVC PERM LAM PF6315
Lot #
Serial #
YY
|
INSPECTION Prior to each use, check locking (pull
sharply to test) and retraction function. Inspect for signs
of deployment, defects or damage to housing, lifeline
(inspect full length), connectors, or missing parts. Inspect
impact indicator - see instruction manual. Ensure presence
and legibility of all labels. Inspection by Competent Person
required at least every 12 months. Immediately remove from
service in event of failed inspection, or if unit is subjected
to a fall.
Lifeline Material: Galvanized Steel
|
Length: 33' (10 m)
Class SRL-LE | Max. Arrest Force: 1,800 lb (8kN)
Avg. Deployment Force: 900 lb (4,4 kN)
User Capacity Weight Range (including tools
and equipment): 100-310 lb (45-140 kg)
Min. Setback Distance From Edge: 0 ft
Max. Arrest Distance - LE* : 8 ft 6 in (2,6 m)
Max. Arrest Distance - Non-LE** : 3 ft 11 in (1,2 m)
Max. Free Fall: 5 ft (1,5 m)
Min. Fall Clearance - LE*: 18 ft (5,5 m)
Min. Fall Clearance - Non-LE**: 7 ft 5 in (2,3 m)
D(m) = 0.75
*Anchor between dorsal D-ring and work
surface
** Anchor at or above dorsal D-ring
Tested in USA.
Assembled in Canada.
guardianfall.com
1
Class SRL-LE
Anchor at or above dorsal D-ring
CR3-EDGE 33 ft (10 m) Self-Retracting LIfeline
CSA Z259.2.2-17
Suitable for leading edge use
2
Part #
Date of Manufacture
42010CSA
MM
Part # | Date of Manufacture: | Lot # | Serial #
Read supplied instructions before using. Failure to follow instructions
may result in serious injury or death. Never modify product. This product is not repairable.
WARNING Read supplied instructions before using.
USE This device is only for use by one person as
a fall arrester. Only make connections directly
Failure to follow instructions may result in serious injury
to attachment point on safety harness. Guard
against swing-fall by keeping lifeline vertically
overhead. Ensure that connection to anchorage
or death. Never modify product. This product is not
is secured properly before use. Avoid lifeline
contact with sharp or abrasive edges and
repairable.
surfaces. May be used as a component of a
PFAS in HLL applications. Design, installation,
and utilization of HLLs must be supervised by
a Qualified Person. Suitable for horizontal use.
USE This device is only for use by one person as a fall
Competent Person must calculate fall clearance
prior to use; fall clearance calculations must
arrester. Only make connections directly to attachment
include considerations for swing fall. Clearance
numbers specified based on lifeline installed
point on safety harness. Guard against swing-fall
vertically overhead and in-line with worker.
by keeping lifeline vertically overhead. Ensure that
Inspection
Date
Initials
connection to anchorage is secured properly before use.
Date of First Use
Avoid lifeline contact with sharp or abrasive edges and
Permitted Service Temperature Range:
-40°F to 130°F (-40°C to 54°C)
surfaces. May be used as a component of a PFAS in HLL
Class SRL LE
DO NOT REMOVE
applications. Design, installation, and utilization of HLLs
LABELS
must be supervised by a Qualified Person. Suitable for
horizontal use. Competent Person must calculate fall
clearance prior to use; fall clearance calculations must
PANTONE® 7549
White
include considerations for swing fall. Clearance numbers
C0 M32 Y100 K0
C0 M0 Y0 K0
R253 G181 B21
R255 G250 B250
specified based on lifeline installed vertically overhead and
#FCB414
#FFFFFF
in-line with worker.
INSPECTION Prior to each use, check locking (pull
sharply to test) and retraction function. Inspect for signs
of deployment, defects or damage to housing, lifeline
(inspect full length), connectors, or missing parts. Refer
to instruction manual for checking snap hook deployment.
Ensure presence and legibility of all labels. Inspection
by Competent Person required at least every 12 months.
Immediately remove from service in event of failed
inspection, or if unit is subjected to a fall.
Lifeline Material: Galvanized Steel | Length: 33 ft (10 m)
User Weight Range (including tools and equipment):
100-310 lb (45-140 kg)
Class SRL-LE | Max. Arrest Force: 1,800 lb (8 kN)
Avg. Deployment Force: 900 lb (4,4 kN)
User Capacity Weight Range (including tools and
equipment): 100-310 lb (45-140 kg)
Min. Setback Distance From Edge: 0 ft
Max. Arrest Distance - LE* : 8 ft 6 in (2,6 m)
Max. Arrest Distance - Non-LE** : 3 ft 11 in (1,2 m)
Max. Free Fall: 5 ft (1,5 m)
Min. Fall Clearance - LE*: 18 ft (5,5 m)
Min. Fall Clearance - Non-LE**: 7 ft 5 in (2,3 m)
D(m) = 0.75
*Anchor between dorsal D-ring and work surface
** Anchor at or above dorsal D-ring
DO NOT REMOVE LABELS
Tested and designed in the United States /
Testé et conçu aux États-Unis
Assembled in Canada/Assemblé au Canada
6
Lot #
Serial #
YY
|
INSPECTION Prior to each use, check locking (pull
sharply to test) and retraction function. Inspect for signs
of deployment, defects or damage to housing, lifeline
(inspect full length), connectors, or missing parts. Inspect
impact indicator - see instruction manual. Ensure presence
and legibility of all labels. Inspection by Competent Person
required at least every 12 months. Immediately remove from
service in event of failed inspection, or if unit is subjected
to a fall.
Lifeline Material: Galvanized Steel
|
Length: 33' (10 m)
Class SRL-LE | Max. Arrest Force: 1,800 lb (8kN)
Avg. Deployment Force: 900 lb (4,4 kN)
User Capacity Weight Range (including tools
and equipment): 100-310 lb (45-140 kg)
Min. Setback Distance From Edge: 0 ft
Max. Arrest Distance - LE* : 8 ft 6 in (2,6 m)
Max. Arrest Distance - Non-LE** : 3 ft 11 in (1,2 m)
Max. Free Fall: 5 ft (1,5 m)
Min. Fall Clearance - LE*: 18 ft (5,5 m)
Min. Fall Clearance - Non-LE**: 7 ft 5 in (2,3 m)
D(m) = 0.75
*Anchor between dorsal D-ring and work
surface
** Anchor at or above dorsal D-ring
Tested in USA.
Assembled in Canada.
guardianfall.com
Publicité
